Blinds Installation

Fitted in just 10 minutes...

There are some variations in fitting our blinds for differing manufacturers roof windows, and these are shown in the model-specific instructions supplied.

However the basic installation procedure for each blind type follows the same straightforward procedure - take a look at the installation details to see just how simple we've made the fitting process.

Blinds Installation

Blackout Blinds
Roller Blinds
Venetian Blinds
Awning Blinds

Fix Mounting Brackets

Left and right blind mounting plates are screwed into place...

Click Blind Into Place

...the blind unit clicks into the mounting plates, secured by a screw at each end...

Fit the Side Rails

...finally, the two aluminium blind guides are slotted into the blind unit and screwed to the frame. It's as simple as that!

Fitting our blackout blinds to VELUX Roof Windows

Watch this video sequence if you are fitting to VELUX windows

View

Fix Mounting Brackets

Left and right mounting brackets screw to the frame...

Insert Roller Blind

...the roller unit clicks into the brackets and is secured by a screw at each side...

Pin Mount Hooks to Frame

...these brackets are then nailed to the frame in three positions, to secure the blind.

Job done!

Fix Mounting Brackets

Left and right blind mounting plates are screwed into place...

Click Blind Into Place

...the blind unit clicks into mounting plates, and is screwed to the inside top rail of the window...

Fix Tension Wire Connectors

... the cord ends are secured with the brackets provided...

Remove temporary retaining strap

... the temporary retaining strap is discarded. The blind can be pushed up or down by hand, and the slat angle adjusted by the control at the top right-hand side.